Filter
Top Products
Radio Operations
Changing
the reception area
This unit is initiallyset to USA frequencyintervals
of
10kHz
for
AM
and 200 kHz for
FM.
When
using
it
outside the USA, the frequency reception
range can be switched to the intervals below.
u.s.
Other
Europe
standard
countries
standard
Frequency
10 kHz
9 kHz 9 kHz
~
spacing
«
Frequency
530 to
531
to
531
to
range 1,710 kHz 1,629 kHz 1,602 kHz
Frequency
200 kHz'
50 kHz 50 kHz
~
spacing
u..
Frequency 87.9 to 87.0 to 87.5 to
range 107.9 MHz
108 MHz
108 MHz
Setting
the
reception area
* All station preset memories are lost when the
reception area is changed.
1.
Press the [AM/FM] button and select the
desired radio band (FM or AM).
• U.S.
standard
(initial
setting
for
US model)
2.
While pressing the [DISP] button, press and
hold the number "1" of the [DIRECT] buttons
for 2 seconds or longer.
• Other
countries
(new setting)
3.
While pressing the [DISP] button, press and
hold the number "2" of the [DIRECT] buttons
for 2 seconds or longer.
• Europe
standard
(initial
setting
for
Europe
model)
4.
While pressing the [DISP] button, press and
hold the number "3" of the [DIRECT] buttons
for 2 seconds or longer.
Listening
to
the radio
1.
Press the [AM/FM] button to select the radio
mode. The frequency appears
on
the display.
2.
Press the [AM/FM] button to select the radio
band. Each time the button
is
pressed, the
radio reception band changes
in
the following
order:
FM1
~
FM2
~
FM3
~
AM
~
FM1
...
3.
Press the
[!]
or
[,]
button to tune
in
the
desired station.
Mute
Use this function to turn off the sound
immediately.
1.
Press the
[':~~IE]
button. The sound turns off
and
"MUTE" appears on the display.
2.
Press the
[':~~IE
] button again to cancel the
mute mode.
Tuning
There are 3 types of tuning modes available,
seek tuning, manual tuning and preset tuning.
Seek
tuning
1.
Press the [AM/FM] button and select the
desired band (FM or AM).
* If "MANU" is lit
on
the display, press and hold
the [AM/FM] button. "MANU"
on
the display
goes off, and seek tuning is now available.
2.
Press the
[!]
or
[,]
button to automatically
seek a station.
When the
[!]
button is pressed, the station is
sought
in
the direction of higher frequencies;
if the
[,]
button
is
pressed, the station
is
sought
in
the direction of lower frequencies.
Manual
tuning
There are 2 manual tuning methods available:
Quick tuning and step tuning.
When you are
in
the step tuning mode, the
frequency changes one step at a time.
In
the
quick tuning mode, you can quickly tune the
desired frequency.
1.
Press the [AM/FM] button and select the
desired band (FM or AM).
* If "MANU" is not lit
on
the display, press and
hold the [AM/FM] button. "MANU"
is
lit
on
the
display and manual tuning
is
now available.
2.
Tune
in
a station.
•
Quick
tuning
Press and hold the
[!]
or
[,]
button for 1 second
or longer to tune
in
a station.
• Step'
tuning
Press the
[!]
or
[,]
button to manually tune
in
a
station.
CM05
15