Filter
Top Products
CD Changer Operations
CD
changer
functions
When
an
optional CD changer (additional
DCZ625 CeNET changer required)
is
connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [DISC] button to select the CD changer
mode to start play. If 2 CD changers are
connected, press the [DISC] button to select the
CD changer for play.
* If "NO
MAG"
appears on the display, insert the
magazine into the CD changer. "D-CHECK"
appears on the display while the player loads
(checks) the magazine.
* If "NO DISC" appears on the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode
may
notbe usable.
ACAUTION
Depending
on
the
recording
format, CD-ROM
discs
may
not
play
properly.
Pausing
play
1.
Press and hold the
[':~~IE
] button for 1 second
or longer to pause play. "PAUSE" appears
on
the display.
2.
To resume CD play, press and hold the
[':~~IE]
button for 1 second or longer again.
Selecting
a
track
• Track-up
1.
Press the
[!]
button to move ahead to the
beginning of the next track.
2.
Each time you press the
[!]
button, the track
advances ahead to the beginning of the next
track.
• Track-down
1.
Press the
[T]
button to move back to the
beginning of the current track.
2.
Press the
[T]
button twice to move to the
beginning of the previous track.
Fast-forward/fast-rewind
• Fast-forward
Press and hold the
[!]
button for 1 second or
longer.
• Fast-rewind
Press and hold the
[T]
button for 1 second or
longer.
Selecting
a CD
1.
Press the
[~DISC~]
button to select the
desired disc.
* If a CD is not loaded
in
a slot of magazine,
pressing the
[~DISC--*]
button can not work.
Scan
play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This
function continues on the disc until it
is
canceled.
* The scan play is useful when you want to select a
desired track.
1.
Press the [SCAN] button.
2.
To cancel the scan play, press the [SCAN]
button again.
Disc
scan
play
Disc scan play locates and plays the first 10
seconds of the first track
on
each disc
in
the
currently selected CD changer. This function
continues automatically until it
is
canceled.
* Disc scan play is useful when you want to select a
desired CD.
1.
Press and hold the [SCAN] button for 1
second or longer.
2.
To cancel disc scan play, press the [SCAN]
button again.
Repeat
play
Repeat play continuously plays the current track.
This function continues automatically until it
is
canceled.
1.
Press the [REPEAT] button.
2.
To cancel repeat play, press the [REPEAT]
button again.
Disc
repeat
play
After all the tracks
on
the current disc have been
played, disc repeat play automatically replaysthe
current disc overfrom the first track. This function
continues automatically until it
is
canceled.
1.
Press and hold the [REPEAT] button for 1
second or longer.
2.
To cancel disc repeat play, press the
[REPEAT] button again.
30
CM05