Filter
Top Products
Radio Operations
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) existto store individual radio stations
in
memory. Pressing the corresponding
[DIRECT] button recalls the stored radio
frequency automatically.
1.
Press the [AM/FM] button and select the
desired band (FM or AM).
2. Press the corresponding [DIRECT] button to
recall the stored station.
* Press and hold oneofthe [DIRECT] buttonsfor
2 seconds orlongerto store the current station
into preset memory.
Manual memory
1.
Select the desired station with seek tuning,
manual tuning or preset tuning.
2.
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned
in
sequentially. If 6
receivable stations cannot
be
received, a
previously stored stations remain at the memory
position.
1.
Press the [AM/FM] button and select the
desired band (FM or AM).
2.
Press and hold the [ENT] button for 2seconds
or longer. The stations with good reception
are stored automatically to the preset
channels.
Preset scan
Preset scan receives the stations stored
in
preset
memory
in
order. This function is useful when
searching for a desired station
in
memory.
1.
Press the [ENT] button.
2.
When a desired station is tuned in, press the
[ENT] button again to continue receiving that
station.
Note:
• Be careful not
to
press and holdthe [ENT] button
for
2 seconds
or
longer, otherwise the auto store
function is engaged
and
the unit starts storing
stations.
16
CMD5