Filter
Top Products
Roughness
Ball-point pen
Storage
• Do not expose compact discs to direct sunlight
or any heat source.
•
Do
not expose compact discs to excess
humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use of
such discs may cause malfunction or damage.
• To remove a compact disc from its storage
case, press down
on
the center of the case and
lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD
protection sheets or discs equipped with
stabilizers, etc. These may damage the disc or
cause breakdown of the internal mechanism.
Cleaning
• To remove fingermarks and dust, use a soft
cloth and wipe
in
a straight line from the center
of the compact disc to the circumference.
• Do not use any solvents, such as commercially
available cleaners, anti-static spray, or thinner
to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing
it.
Handling Compact Discs
Use only compactdiscs bearing the
~Q~~
or U
mark.
Do
not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded
in
CD-R/CD-RW mode may
not
be
usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are easily affected by high
temperature and humidity. Prolonged
exposure to high heat and humidity may make
the discs unplayable. Therefore, do not leave
them for a long time
in
the boat.
• New discs may
have rough
edges. If such
discs are used,
the player may
not work, or the
sound may skip.
Use a ball-point
pen or the like to
remove any
roughness from the edge of the disc.
• Never stick labels
on
the surface of the
compact disc or mark the surface with a pencil
or pen.
• Never
playa
compact disc with any cellophane
tape or other glue
on
it
or with peeling off
marks. If you try to play such a compact disc,
you may not be able to get
it
back out of the CD
player or it may damage the CD player.
Front Panel
Jl..CiAUTlON
When opening and closing the front panel, be
careful not to catch your fingers. They could
be injured.
1.
Always use this unit with the front panel
closed.
2.
Do
not force operations or use this device
abnormally when opening or closing the front
panel.
3.
Do
not use the front panel as a tray to place
objects on when
it
is
open.
4.
When closing the front panel, do not press the
[OPEN]
button.
5.
Strong impacts to the operating or dis'Jlay
section can cause damage or deform ltion.
6.
If the front panel does not open fully,
..
Jently
open it with your hand.
7.
Do not touch the panel OPEN detection
switch.
~
..
~I-
OPEN detection
sWitch.
CMD5
5