Filter
Top Products
26 DXZ948RMP
English
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
• The factory default setting is “ON”.
■ To switch the AF function ON/OFF
1. Touch MODE.
2. Touch AF.
Each touch toggles the display on AF
between “ON” and “OFF”.
3. Touch RTN.
∗ If the reception of the current broadcast
station deteriorates, “SEARCH” appears in
the display, and the radio searches for the
same programme on another frequency.
■ AF function between RDS and DAB
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, this
unit automatically switches to receive the
broadcast with the better reception.
• This function only operates when the DAH923
or DAH913 DAB unit (Optional) is connected.
• This factory default setting is “ON”.
1. Press the [A] button to set the adjust mode.
2. Touch on the setting item display to
select “LINK ACT” under “TUNER”.
ADJUST MODE
LINK ACT
ON
TUNER
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
either “ON” or “OFF”.
ON:
AF switching between DAB and RDS is
enabled.
OFF:
AF switching between DAB and RDS is
disabled.
4. Press the [A] button to return to the previous
mode.
RDS Operations
RDS (Radio Data System)
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS
data.
This system can display the name of the
broadcast station being received (PS), and can
automatically switch to the broadcast station
with the best reception as you move over long
distances (AF switching).
If a traffic announcement or programme type is
broadcasted from an RDS station, this
broadcast is received no matter what mode you
are in.
Also, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and
interruption of the station being received with
traffic information from other stations (TP). This
function is not available in some areas.
When using the RDS function, always set the
radio to the FM mode.
• AF : Alternative Frequency
• PS : Programme Service Name
• PTY : Programme Type
• EON : Enhanced Other Network
• TP : Traffic Programme
• PI : Programme Identification
•TA : Traffic Announcement
∗ RDS interrupt does not function during AM
radio reception.
∗ When this unit receives the RDS signal,
and can read PS data, PS appears in the
display.