Filter
Top Products
28 DXZ948RMP
English
Selecting PTY
1. When you press the [ ] button, this unit
enters the PTY select mode.
2. Either touch on the right of the
display, or turn the [ROTARY] knob to select
PTY.
∗ Below are the factory default settings
stored:
3. The PTY select mode is cancelled
automatically 7 seconds after, or touch RTN
a PTY is selected.
PTY seek
1. When you press the [ ] button, the PTY
select mode is turned on.
2. Either touch on the centre of the
display, or turn the [ROTARY] knob to select
PTY.
3. Touch on the left of the display.
When is touched, this unit seeks a PTY
broadcast moving up the frequencies, while
when is touched it seeks moving down
the frequencies.
∗ If no station with the selected PTY
broadcast can be received, this unit
returns to the previous mode.
PTY preset memory
1. When you press the [ ] button, the PTY
select mode is turned on.
2. Touch on the centre of the display to
select PTY.
The 29 PTY types in the table below can be
selected.
RDS Operations
Auto store function for TP
stations
You can automatically store up to 6 TP stations
to preset memory. If the number of TPs that can
be received is less than 6, broadcast stations
already stored in memory are left without being
overwritten.
1. Make sure that “TA” is displayed, and touch
MODE.
If “TA” is not displayed, press the [TA] button
to display “TA”.
2. Touch and hold A-STORE for 2 seconds or
longer.
The MODE display changes to “A-STORE”
and the preset No. in the auto-store
operation appears on the preset No. display.
• TP stations with good reception sensitivity are
stored to preset memory.
•Even if you select FM1 or FM2, a TP station is
stored to memory for FM3.
PTY
This function enables you to listen to a
broadcast of the selected programme type even
if this unit is in a function mode other than radio.
• Some countries do not yet have PTY
broadcast.
• In the TA standby mode, a TP station has
priority over a PTY broadcast station.
■ To set the PTY standby mode
When you press the [ ] button, “PTY” lights
in the display and the PTY standby mode is
turned on. When the selected PTY broadcast
starts, the PTY item name appears in the
display.
■ To cancel the PTY standby mode
Press and hold the [ ] button for 1 second or
longer. “PTY” goes off in the display and the
PTY standby mode is cancelled.
■ To cancel a PTY interrupt broadcast
Press the [ ] button during the PTY interrupt
broadcast. The PTY interrupt broadcast is
cancelled and this unit returns to the PTY
standby mode.
Preset
PTY item
number
ENGLISH Contents
001 News News
002 Info Information
003 Pop M Pop Music
004 Sport Sport
005 Classics Serious Classical Music
006 Easy M Easy Listening Music