Filter
Top Products
30 DXZ948RMP
English
RDS Operations
Switching the PTY display
language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY
displayed in the display.
• The factory default setting is “ENGLISH”.
1. Press the [A] button to set the adjust mode.
2. Touch on the setting item display to
select “LANGUAGE” under “TUNER”.
ADJUST MODE
LANGUAGE ENGLISH
TUNER
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
the language.
∗ Select one of ENGLISH, DEUTSCH
(German), SVENSKA (Swedish) or
FRANÇAIS (French).
4. Press the [A] button to return to the previous
mode.
Setting RDS interrupt when
the 2-ZONE function is used
(RDS-INT 2Z)
When this function is set to “ON”, and there is
an RDS interrupt while the 2-ZONE function is
in use, RDS information can be received.
• When there is an RDS interrupt, the 2-ZONE
function turns “OFF”.
• If there was an alarm interrupt even with
“RDS-INT 2Z” set to “OFF”, the RDS
information is received.
• The factory default setting is “ON”.
1. Press the [A] button to set the adjust mode.
2. Touch on the setting item display to
select “RDS-INT 2Z” under “TUNER”.
ADJUST MODE
RDS - INT 2Z
ON
TUNER
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
either “ON” or “OFF”.
ON:
RDS information is received when there is
an RDS interrupt while the 2-ZONE function
is in use.
OFF:
When the 2-ZONE function is in use, RDS
information other than the alarm interrupt is
not received.
Note:
• If Radio mode is selected when TA (Traffic
Announcement) and PTY are turned “ON”, the
interrupts are received even if RDS Interrupt is
turned “OFF”.
4. Press the [A] button to return to the previous
mode.
Volume setting of TA,
emergency broadcast
(ALARM) and PTY
The volume for TA, ALARM and PTY interrupt
broadcasts can be set during TA, ALARM or
PTY interrupt broadcast.
• The factory default setting is “15”.
During a TA, ALARM or PTY interrupt
broadcast, turn the [ROTARY] knob clockwise
or counterclockwise to set the volume to the
desired level (0 to 33).
• When the TA, ALARM or PTY interrupt
broadcast ends, the volume returns to the
level that was active before the interrupt
broadcast.