Filter
Top Products
62 DXZ948RMP
English
5.1ch Surround Decoder Operations
4. Touch on the DSF menu No. to select
the desired DSF menu.
RTN
CHURCH
DSF MODE
BASIC
1
ON
DSF menus
HALL ➜ CHURCH ➜ STADIUM ➜ LIVE ➜
JAZZCLUB ➜ THEATER ➜ HALL...
5. Press the [SOUND] button to return to the
original mode.
Selecting the Parametric
Equalizer menu
Parametric Equalizer (P.EQ) allows you to
compensate the entire frequency level range in
detail by smooth curve using frequency
compensation matched to the type of your car.
• The factory default setting provides the
following settings for all speakers.
FREQ = 1kHz, Q =1, GAIN = 0dB
1. Press the [SOUND] button.
2. Touch P.EQ.
RTN
DSF
OFF
P. EQ
OFF
A - MODE
Dolby PL
II
OFF
SOUND MENU
3. Touch on the ON/OFF display.
The P.EQ effect is toggled ON/OFF.
RTN
OFF
SIGNAL
P.EQ MODE
P-NOIS
When the P.EQ effect is set to “OFF”, the
P.EQ setting is not reflected on the music
source. This ends the P.EQ setting. Press
the [SOUND] button to return to the original
mode.
4. Touch on the P.EQ menu No. to select
the P.EQ menu.
RTN
ON
SP - SEL
P.EQ MODE
FRONT
P.EQ menus
SIGNAL ➜ SP-SEL ➜ BAND ➜ FREQ ➜ Q
➜ GAIN ➜ SIGNAL...
5. Touch on the right on the display and
adjust the item as desired.
SIGNAL (selects the adjustment signal):
Selects “P-NOIS” or “MUSIC”
• P-NOIS: set when pink noise is to be
used
• MUSIC: set to use music signals
SP-SEL (selects the speakers whose P.EQ
value is to be adjusted):
Select one of “FRONT”, “CENTER” or
“SURROUND”.
• FRONT: front speaker
• CENTER: centre speaker
• SURROUND: surround speaker
BAND (selects the frequency band):
Select one of band 1 to 3
FREQ (selects the centre frequency):
The adjustment range is from 20 Hz to
20 kHz.
Q (sets the Q curve):
Sets one of 1, 3, 5, 7, or 20 as the
sharpness of the Q curve.
GAIN (adjusts the output level):
Adjusts the gain (output level) within the
range -12dB to +12dB. (1dB steps, 25
points)
6. Repeat steps 4 and 5 to adjust the desired
item.
7. Press the [SOUND] button to return to the
original mode.
■ P. EQ adjustment
The settings that can be adjusted in the P.EQ
menu are as follows. The centre frequency, gain
and Q curve can be stored to channel/band
combinations.
For example, centre frequency “250Hz”, gain “
-8dB” and Q curve “3” can be stored to band 1
on the front.
For details on the P.EQ function, see “P. EQ
adjustment” (cf. page 21).
No. Function Discription
Name
1 HALL Large concert hall
2 CHURCH Church with a vaulted
ceiling
3STADIUM Large stadium without
roof or walls
4 LIVE Live performance hall,
larger than a jazz club
5 JAZZCLUB Jazz club with a low
ceiling
6 THEATER Movie or drama theater