Filter
Top Products
DXZ948RMP 41
English
Operations Common to Each Mode
Setting the screen saver
(SCREEN SVR)
This function allows you display a screen saver
when you have not operated this unit for about
30 seconds.
• The factory default setting is “ON”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “SCREEN SVR” under “DISPLAY”.
ADJUST MODE
SCREEN SVR ON
DISPLAY
3. Either touch on the right of the
display, or turn the [ROTARY] knob to select
“ON” or “OFF”.
4. Press the [A] button to return to the original
mode.
■ To switch the screen saver display
Touch PREV or NEXT while the screen saver is
displayed.
Each touch of these buttons switches the
screen saver display.
● Screen savers
Screen saver pattern 1
Screen saver pattern 2
Screen saver pattern 3
Spectrum analyzer pattern 1
Spectrum analyzer pattern 2
Spectrum analyzer pattern 3
Spectrum analyzer pattern 4
Message information
PREV
NEXT
MESSAGE
Active MatriX Control System
Active MatriX Control System
SS SCAN
The above 8 indications are displayed for
about 10 seconds each.
Entering messages to display
in message information
(MSG INPUT)
1 type of screen saver is available. For details
on how to switch the screen saver display, see
“Setting the screen saver”.
• Up to 30 characters can be entered.
• The factory default setting is “Active MatriX
Control System”.
1. Press the [A] button to set to the adjust
mode.
2. Touch on the setting item display to
select “MSG INPUT” under “DISPLAY”.
ADJUST MODE
MSG INPUT EDIT
DISPLAY
3. Touch EDIT.
The mode changes to the message entry
mode.