Filter
Top Products
DXZ948RMP 63
English
5.1ch Surround Decoder Operations
Changing settings
When a 5.1ch surround decoder is connected,
settings relating to music in the adjust mode are
changed.
Selecting setting items
The following describes the items whose
settings are changed.
For details of other items that are not changed,
see “Changing settings” (cf. Page 39) at
“Operations Common to Each Mode”.
1. Press the [A] button.
The mode changes to the adjust mode.
ADJUST MODE
CENTER-SP
SOUND
ON
Main Item Sub-item
SOUND CENTER-SP / SRD-SP / SUB-WOOFER
• Setting the speaker ON/OFF (cf. page 64)
FRONT HPF / CENTER HPF / SRD HPF / SUB-W LPF
• Adjusting the speaker filter frequency (cf. Page 64)
SP GAIN
• Adjusting the speaker output level (cf. page 46)
DELAY CENTER-SP / SRD-SP
• Adjusting the speaker delay time (cf. page 65)
DOLBY D D-RANGE
• Adjusting the dynamic range (cf. page 65)
PL II CONT PANORAMA / DIMENSION / CTR WIDTH
• Setting the music mode in detail (cf. page 47)
● Setting items
2. Touch on the setting item display to
select the item to set.
∗ Touching on the left of the display
switches main items 1 item at a time.
Touching on the left of the display
switches sub-items continuously.
∗ Touching on the centre of the
display switches the sub-items 1 item at a
time. Touching switches sub-items
continuously.
3. When “THROUGH” is displayed at the right
of the display, touch THROUGH to switch to
the adjustment details display.
4. Either touch on the right of the
display, or turn the [ROTARY] knob to set
the details.
■ To return to the original mode
1. Press the [A] button again.