Filter
Top Products
User Manual.doc
- 108 / 156 -
５-８-２２． Display ERROR (USB)
（1/2）
Function Display ERROR in USB Mode
Operation
of button
-
Detail
It is able to switch other mode or adjust AUDIO when ERROR occurs.
It will nothing when ERROR occurs in other mode except USB Mode.（Display ERROR only in USB Mode）
■ Bus Error
It occurs when more than 1.5A overcurrent caused by USB 5V Bass shorts.
It displays [CHECK DEVICE].
It will return by turning ACC OFF/ON.
It will stop power supply automatically but display nothing when the current is between 1 to 1.5A. It will return
automatically if the cause of the overcurrent removed.
■ Unsupported Device ERROR
It occurs when it is connected to a device which is not supported, such as USB mouse.
It also occurs when iPod is frozen or cannot communication rightly.
It occurs if it is connected to an iPod which is not Object iPod. (such as iPod 4G)
It displays [CHECK DEVICE]. （Refer to Display Specification for Detail）
It will return when disconnect them.
■ Playing ERROR
It occurs when USB communication disconnected by surge or decoding failure happens when playing..
It occurs when timeout happens for iPod responses extremely late.
It occurs when error is notified by iPod.
It displays [CHECK DEVICE].
It will return when disconnect them.
It may return automatically after displaying error because it will retry if you do nothing.
■ iPod Recognization ERROR
It will display the ERROR when error occurs when it is certifying the connecting iPod. It mainly happens with
imitation iPod, Unstable iPod and so on.
It displays [CHECK DEVICE].
■ HUB ERROR
It occurs when it is connected to USB-HUB. Sometimes it also occus if there are both Mass Storage Class and
HUB Class.
It displays [CHECK DEVICE].
It will return when disconnect them.