Filter
Top Products
User Manual.doc
- 92 / 156 -
５-８-１３． RDM （MSC）
Function RDM Mode of MSC
Operation
of button
Touch the RPT / RDM key for more than 0.5sec.
Detail
It will switch to next RDM mode like following if you touch the RPT / RDM key for more than 0.5sec each time.
RANDOM
OFF
→
FOLDER
RANDOM
→
ALL
RANDOM
→
RANDOM
OFF
Initial setting is OFF.
BEEP sounds when you switch to RDM Mode.
It will display the RDM mode name for 3sec, then trturns to the last display when you switch to RDM Mode.
It will keep displaying P-TIME until it gets the title.
RDM Indicator will be on in RDM Mode.
It will keep RDM Mode when you turn ACC/POWER OFF or switch to other source mode.
RDM Mode will be released by following operation.
Touch the UP or DOWN key.
Touch the SCAN key. （SCAN Mode will be ON when Key is ON）
Touch the RPT / RDM key for less than 0.5sec. （RPT Mode will be ON）
Touch the RPT / RDM key for more than 0.5sec in ALL RDM Mode. （RDM Mode released）
Disconnect the media device. （Replaced with other media device.）