Filter
Top Products
User Manual.doc
- 81 / 156 -
５-８-２． USB DISCONNECT
Function Disconnect USB Device
Operation
of
butto
n
Disconnect USB Connector by hand
Detail
It will keep USB Mode when you disconnect USB device in USB Mode.
It will keep current Mode when you disconnect USB device in other mode except USB Mode.
It will start USB Mode when you turn POWER ON next time if you disconnect the device when POWER is OFF.
It will work like following if you replace the connected device when POWER(ACC) is OFF.（Destination for All Models）
If you replace the connected device with an iPod, it will start to play from where controlled by the iPod.
If you replace the connected device with a MSC (Even it is the same MSC.), it will start to play from top.
It will display [USB READING] and start USB Mode when you turn POWER ON next time if you disconnect the device
in USB Mode when POWER is OFF. If no device detected it will go to NO DEVICE. （It takes 15sec to confirm NO
DEVICE.）
Trickplay Mode will be released if you disconnect the USB device.
Trickplay Mode will be kept when you turn ACC on next time if you disconnectand connect the same USB device When
ACC is OFF.