Filter
Top Products
User Manual.doc
- 67 / 156 -
５-７-１０． RDM
Function CD RDM Mode
Operation
of button
Touch the RPT / RDM key for more than 0.5sec.
Detail
■ When playing CD-DA
It will switch to next mode like the following if you touch the RPT / RDM key for more than 0.5sec.
RANDOM
OFF
→
ALL
RANDOM
→
RANDOM
OFF
■ When playing DISC MP3/WMA/AAC
It will switch to next mode like the following if you touch the RPT / RDM key for more than 0.5sec.
RANDOM
OFF
→
FOLDER
RANDOM
→
ALL
RANDOM
→
RANDOM
OFF
Initial setting is OFF.
BEEP sounds when you swtich the Mode.
If you switch RDM modes, it will display the RDM Mode Name for 3sec, then return to the last display mode.
If it has not got the title, it will display P-TIME until it gets the title.
RDM indicator is ON in RDM Mode.
It will keep RDM Mode setting even if you turn ACC/POWER OFF or go to other source mode.
RDM Mode will be released by following operations.
Touch the UP or DOWN key. （Only MP3/WMA/AAC： FOLDER UP/DOWN (Steering Controller is
OK, too)）
Touch the SCAN key. （Scan Mode is ON when Key is ON.）
Touch the RPT / RDM key for less than 0.5sec. （RPT Mode is ON）
Touch the RPT / RDM key for more than 0.5sec in all the RDM Modes. （Release RDM Mode）
EJECT the CD.