Filter
Top Products
User Manual.doc
- 23 / 156 -
５-３-４． SEEK UP / DOWN
Function RADIO SEEK UP/DOWN
Operation
of button
Touch the >> & << key （Action when Key is ON.）
Detail
If you touch the >> or << key in RADIO mode, the receiving frequency will seek up or down.
It will be MUTE while seeking.
If the frequency reaches the maximum when you are seeking up, it will go back to the minimum frequency and go on
seeking up.
If the frequency reaches the minimum when you are seeking down, it will go back to the maximum frequency and go on
seeking down.
When it goes back to the maximum/minimum frequency, it will keep the next frequency for 500msec then go on
seeking.
If you go to volume adjustment mode or T/B adjustment mode while seeking, the adjustment value will be kept even
frequency seek finishes after a receiving station is sought out.
Sensitivity of seeking AM is linked to the illumination. It will be LO SEEK when the illumination is ON, and be DX SEEK
when the illumination is OFF.
Sensitivity of seeking FM is fixed to DX.
SEEK mode will be released by following conditions.
When received a station which is possible to be received.
When you go to other sourcemode. （The last frequency is the frequency before seeking.）
When you switch to other band. （The last frequency is the frequency before seeking）
when you turn ACC / POWER OFF. （The last frequency is the frequency before seeking）
When you turn the TUNE key. （Stop at the frequency when key is ON）
When you touch the >> or << key. （Stop at the frequency when key is ON）
When you touch the 1 ～ 6 key. （Call the cahannel you touch when key is ON）
When you touch the SCAN key. （Scan starts from the frequency when key is ON）
When you touch the PTY / CAT key. （Start PTY selection mode from the frequency when key is ON.）