Filter
Top Products
User Manual.doc
- 26 / 156 -
５-３-７． SCAN
Function RADIO Station SCAN UP
Operation
of button
Touch SCAN key
Detail
If you touch the SCAN key in RADIO mode, it will start to scan radio station which is possible to receive.
It will start to scan radio stations, which is possible to receive, from the next frequency.
It will be mute while scaning, if there is no station which is possible to receive.
Mute mode will be off and radio sound comes out, when radio station, which is possible to receive, is found.
When radio station, which is possible to receive, is found, it will receive the frequency for 5 seconds, then goes on to
scan the next station.
It will scan around for once, and stop when it goes to the frequency that it starts.
It will not scan the beginning station (the ending station).
SCAN mode will be released by following conditions.
When you go to other sourcemode. （The last frequency is the frequency before scan.）
When you switch to other band. （The last frequency is the frequency before scan.）
when you turn ACC / POWER OFF. （The last frequency is the frequency before scan.）
When you turn the TUNE key. （Stop at the frequency when key is ON）
When you touch the >> or << key. （Stop at the frequency when key is ON）
When you touch the 1 ～ 6 key. （Call the cahannel you touch when key is ON）
When you touch the SCAN key. （Scan starts from the frequency when key is ON）
When you touch the PTY / CAT key. （Start PTY selection mode from the frequency when key is ON.）