Filter
Top Products
22
ENGLISH
(1) Before playing with the surround function
14
SURROUND PLAYBACK
• Adjustments using the test tones can only be performed in
the “Auto” mode and are only valid for the Auto decode
Surround modes. The adjusted levels are automatically
stored in the memory.
1
Press the TEST TONE button.
2
Test tones are output from the different speakers. Use
the channel volume adjust buttons to adjust so that the
volume of the test tones is the same for all the
speakers.
• The channel to be adjusted can be changed using the
CH.SELECT button and the ( and ) cursor
buttons on the remote control unit during the
adjustments using the test tones.
3
After adjusting using the test tones, adjust the channel
levels either according to the playback sources or to
suit your tastes, as described below.
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODESURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
RTRDS CT
PTY
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
TV/VCR
SLEEP
REMOCON MODE
8
9
CLEAR
CALL
0
+10
7
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWER
TV POWERTV POWER
TV
NTSC/PAL
MEMO
POWER
CH
2
1,3
2
T.TONE
Remote control unit
Remote control unit
T.TONE
Remote control unit
• Even after adjusting using the test tones, the various
channels can be adjusted using the procedure described
below to suit the program source and your preferences.
1
Select the speaker whose level you want to adjust.
• The channel switches as shown below each time the
button is pressed.
CH.SELECT
Remote control unit
2
Adjust the volume level of the selected speaker while
the channel level is displayed.
Remote control unit
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODESURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
RTRDS CT
PTY
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
TV/VCR
SLEEP
REMOCON MODE
8
9
CLEAR
CALL
0
+10
7
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWER
TV POWERTV POWER
TV
NTSC/PAL
MEMO
POWER
CH
2
1
2
[1] 2-channel mode settings
• In the auto decode mode, it is possible to automatically conduct multi-channel playback in the Dolby Digital or DTS surround
mode or play in the stereo 2-channel mode (AUTO STEREO mode: factory default setting). For 2-channel input signals, one of
four play modes can be set with the 2-channel mode setting (Auto Stereo, Dolby Pro-Logic II Cinema, Dolby Pro-Logic II Music
and Dolby Pro-Logic).
When the function is set to VCR, CDR/TAPE or TUNER, the “Auto Stereo” 2-channel mode cannot be selected. To
play in stereo, set the surround mode to “STEREO” (page 19).
11, 3
1
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODESURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
RTRDS CT
PTY
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
CALL
0
+10
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
2
3
1
3
1
Set the surround mode to “AUTO DECODE”.
•“AUTO DECODE” is displayed, then the normal
display reappears.
SURROUND
MODE
Main unit
FUNCTION
/ SELECT
Main unit
SURROUND
Remote control unit
\
2
Press the SURR.PARA button on the remote control
unit and select the 2-channel decode mode.
SURR.PARA
Remote control unit
This can be selected when the digital input consists
of no signal, PCM signals, Dolby Digital 2-channel
signals, as well as when the analog input is
selected.
3
Select the desired 2-channel
decode mode using the ( and
) cursor buttons on the
remote control unit.
• The mode switches as follows
each time one of the buttons
is pressed:
Remote control unit
If the AUTO DECODE/2CH MODE button on the
main unit is pressed when the mode is already set
to AUTO DECODE, the mode switches to the 2-
channel mode. The mode switches as follows each
time the button is pressed.
AUTO ST
PRO LOGIC
PLII CINEMA
PL
II MUSIC
NOTES:
• The 2-channel decode mode cannot be set when Dolby
Digital 5.1-channel signals or DTS signals are being input.
• The 2-channel decode mode is stored separately for the
DVD, TV/DBS and V.AUX modes.
FRONT L
CENTER
FRONT R
SURROUND R
SURROUND L
SUBWOOFER
If the mode is set to anything other than AUTO
DECODE, the AUTO DECODE mode can be set
using the AUTO DECODE/2CH MODE button on
the main unit.
The Auto Stereo mode can be selected when the
function is set to DVD, TV/DBS or V.AUX.
AUTO STEREO
PRO LOGIC
PLO LOGICII C
PLO LOGIC
II M
Once the surround parameters have been set, stop
operating buttons. After several seconds the display
returns to normal and the settings are automatically
validated.