Filter
Top Products
30
ENGLISH
(7) PTY search
Use this function to find RDS stations broadcasting a designated program type (PTY).
For a description of each program type, refer to “Program Type (PTY)”.
1
Set the band to “FM”.
BAND
Remote control unit
52
Press the RDS button until “PTY
SEARCH” appears on the display.
SUB TITLE
RDS
Remote control unit
3
Watching the display, press the
PTY button to call out the desired
program type.
AUDIO
PTY
Remote control unit
4
Press the TUNING + (UP) or –
(DOWN) button to automatically
begin the PTY search operation.
TU
Remote control unit
The station name is displayed on the display after
searching stops.
(8) TP search
Use this function to find RDS stations broadcasting traffic program (TP stations)
1
Set the band to “FM”.
BAND
Remote control unit
4
The station name is displayed on the display after
searching stops.
2
Press the RDS button until “TP
SEARCH” appears on the display.
SUB TITLE
RDS
Remote control unit
3
Press the TUNING + (UP) or –
(DOWN) button TP search begins.
TU
Remote control unit
• If no TP station is found when all the frequencies are
searched, “NO PROGRAMME” is displayed.
(9) RT (Radio Text)
“RT” appears on the display when radio text data is received.
1
To turn the RT mode on, press the
RT button on the remote control
unit until the RT indicator is lit.
TOP MENU
RT
Remote control unit
2
When the station currently tuned in is offering a radio
text message service, the message scrolls on the
display.
• When the RT mode is turned on while an RDS radio station
not offering an RT service is tuned in, “NO TEXT DATA” is
displayed on the display, then the mode automatically
switches to the PS mode.
• In the same way, the mode automatically switches to the PS
mode when the RT service is finished. In this case, the
mode automatically switches from the PS mode back to the
RT mode when an RT broadcast is resumed.
• The RT mode cannot be set in the AM band or for FM
stations not offering RDS broadcasts.
• To turn the RT mode off, press the RT button and switch to
the desired display mode.
• If no station broadcasting the designated program type is
found when all the frequencies are searched, “NO
PROGRAMME” is displayed.
(6) RDS search
Use this function to automatically tune to FM stations that provide RDS service.
1
Set the band to “FM”.
BAND
Remote control unit
4
2
Press the RDS button until “RDS
SEARCH” appears on the display.
SUB TITLE
RDS
Remote control unit
3
Press the TUNING + (UP) or –
(DOWN) button to automatically
begin the RDS search operation.
TU
Remote control unit
When a broadcast station is found, that station's name
appears on the display.
VOLUME
ENTER
BAND
MODE
MENU
FUNCTION
DISPLAY RETURN INPUT MODESURROUND
TOP MENU
SETUP
SDB/TONE
MUTE
SURR.PARA
SUB TITLE ANGLE
AUDIO
RTRDS CT
PTY
SHIFT
CH.SELECT
CH
T.TONE
TU
PROG/DIRECT
REPEAT A-B
REPEAT RANDOM
DVD
REMOCON MODE
CALL
0
+10
STATUS
CDR/MD/TAPE
TUNER/TV/VCR
VCR POWER
TV POWER
NTSC/PAL
MEMO
POWER
1
3
2
Before operating the remote control
unit!
• Be sure to set the AV mode using
the remote control
mode selector buttons.
TUNER/TV/VCR
• If no RDS station is found when all the frequencies are
searched, “NO PROGRAMME” is displayed.