Filter
Top Products
18
6
SCAN OPERATION
■ Scan types
Up to 25 programmed scan ranges (00A/00b to 24A/24b), full
scan, band scan and memory bank scan provide scanning
versatility. Each scan can have skip channels programmed.
FULL SCAN (p. 19)
Repeatedly scans all fre-
quencies over the entire re-
ceiver range.
U.S.A. version cannot re-
ceive some frequencies.
PROGRAMMED SCAN
(p. 19)
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
for frequencies within a
specified range such as re-
peater output frequencies,
etc.
495
kHz
2450.095
MHz
Scan
Jump
SELECTED BAND SCAN
(p. 19)
Repeatedly scans all fre-
quencies over the entire se-
lected band.
Scan
Jump
Scan
Jump
Scan edges
MEMORY SKIP FUNCTION
(p. 22)
Skips unwanted memory
channels that inconvenient-
ly stop scanning. Skip
channels can be toggled
ON and OFF by pushing
[FUNC] + [(V/M) SKIP] in
memory mode.
Not yet
programmed
ch 00
ch 01 ch 02 ch 03
ch 04
ch 05
ch 06ch 49
Band edge or
scan edge
Band edge or
scan edge
FREQUENCY SKIP
FUNCTION (p. 24)
Skips unwanted frequen-
cies that inconveniently
stop scanning. This func-
tion can be turned ON and
OFF in frequency skip func-
tion set mode.
MEMORY (BANK) SCAN
(p. 20)
Repeatedly scans memory
channels except skip chan-
nels within all programmed
channels or within a mem-
ory bank (A–H).
Not yet
programmed
SKIP
ch 00
ch 01 ch 02 ch 03
ch 04
ch 05
ch 06ch 49
Band
edge
Band
edge
Band
edge
Band
edge
Jump
Skip Skip
Scan