Filter
Top Products
40
13
OTHER FUNCTIONS
■ Beep tones
The volume level for confirmation beep tones, which sound
each time a switch is pushed, can be adjusted, as desired.
When “VOLUME” is selected, the beep tone volume level is
linked with the receive volume level.
q Push [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until “Beep Audio” or “bEEP” appears.
•“bEEP” disappears after 1 sec. and “bE” appears when color
LCD is OFF.
e Push [↔] or rotate the tuning dial while pushing [FUNC] to
set the volume level.
r Push [(MODE)SET] to exit set mode.
■ Auto power-off function
The receiver can be set to automatically turn OFF after a
specified period with beep in which no switch is pushed.
120 min., 90 min., 60 min., 30 min. and OFF can be speci-
fied. The specified period is retained even when the receiver
is turned OFF by the auto power-off function. To cancel the
function, select “OFF” in step e below.
q Push [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until “A.Power OFF” or “AP oFF” appears.
•“AP oFF” disappears after 1 sec. and “Ao” appears when color
LCD is OFF.
e Push [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired time or to turn the function OFF.
r Push [(MODE)SET] to exit set mode.
60 min. auto power-offAuto power off set
mode
Auto power-off is
turned OFF.
Beep tone is turned
OFF (minimum).
Beep tone is turned
ON and linked with
the volume level.
Beep tone is fixed
to the set level.
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : OFF
Beep Audio : ______
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : OFF
Beep Audio : OOO___
Light : AUTO
A.Power OFF : OFF