Filter
Top Products
23
6
SCAN OPERATION
e Push [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired scan pause time.
•“2SEC”–“20SEC” : scan pauses for 2–20 sec. on a received sig-
nal.
•“HOLD” : scan pauses on a received signal until it dis-
appears.
r Push [(MODE)SET] to exit set mode.
◊Setting the scan resume time
The scan restarts after a signal disappears according to the
resume time. It can be set from 0–5 sec. or unlimited.
q Push [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
w Rotate [DIAL] until “Scan Resume” or “RESUmE” appears.
•“RESUmE” disappears after 1 sec. and the previously selected
scan resume time and “RE” appears when color LCD is OFF.
e Push [↔] or rotate the tuning dial while pushing [FUNC] to
select the desired scan resume time.
•“1SEC”–“5SEC” : scan restarts 1–5 sec. after the signal disap-
pears.
•“0SEC” : scan restarts immediately after the signal dis-
appears.
•“HOLD” : scan restarts by rotating [DIAL] only.
r Push [(MODE)SET] to exit set mode.
2 sec. resume timeScan resume time
set mode
Scan resumes by
rotating [DIAL] only.
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : HOLD
10 sec. pause timeScan pause time set
mode
Pause scan
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : 10SEC
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF
Pause Scan : HOLD
Priority : OFF
Beep Audio : VOLUME
Light : AUTO
A.Power OFF : OFF