Filter
Top Products
•Each operating band and each memory channel have indepen-
dent settings.
w Push [FUNC] + [(MODE)SET] momentarily to enter set
mode.
•Select a non-band scope screen in advance for color LCD.
e Rotate [DIAL] until “Tone Freq.” or “tonE” appears.
•“tonE” disappears after 1 sec. and “Ct” appears.
r Push [↔] or rotate the tuning dial while pushing [FUNC] to
select a subaudible tone.
t Push [(MODE)SET] to exit set mode.
•Available subaudible tone frequencies (unit: Hz)
CONVENIENT
Store subaudible tone frequencies and tone squelch ON/OFF
settings in memories for easy recall.
The receiver has 50 tone frequencies and consequently
their spacing is narrow. Therefore, some tone frequencies
may receive interference from adjacent ones.
■ Pocket beep operation
This function uses subaudible tones for calling and can be
used as a “common pager” to inform you that someone has
called using the same tone in an amateur band while you
Tone frequency set
mode
Tone Squelch: TSQL
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: TSQL
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: TSQL
Tone Freq. : 254.1
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
88.5 Hz (default) 254.1 Hz tone
29
8
SUBAUDIBLE TONE OPERATION
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1