Filter
Top Products
22
Code Security Function
A
A
If you press the RESET button or remove the
battery:
The first time you turn the unit on again," 1st " and
will appear in the display, asking you to input the
security code.
Repeat steps 4 and 5 above, and input the
security code.
You can start operating the unit again when " OK "
appears in the display.
Canceling the Security Code Screen
Touch [ RTN ] to return to the system setup
screen.
When the battery is removed from the unit's
power switch, you cannot turn on the unit
again unless the preset security code is input.
This function helps prevent theft.
Using the Security System
You must follow steps 1 to 5 to be able to use the
Security Code function. Turning off the power
during the procedure will deactivate the security
code setting.
Select the four digits to use in your security
code.
The four-digit security code is very important, as
you will need it to turn the unit on again when the
code security function is on. Choose the number
carefully and do not forget it (write it down and
keep it separately in a safe place).
Touch the number [ 1 ] - [ O ] and enter your
security code.
If you enter the wrong number, touch [ Clear ].
The last entered number is cleared.
Touch [ Enter ].
The security code will be set.
When " 2nd " appears in the display, you can
start inputing the code.
Touch the number [ 1 ] - [ O ] and enter your
security code again.
Touch [ Enter ] again more.
" OK " will appear in the display, with the code
security function turning on. From this point
on, if the unit is disconnected from the battery,
the security code must be entered the first
time that the unit's power is turned on.
If you input an incorrect security code, the display
ask you once more to input the correct one.
Follow the procedure in step 2 above.
NOTE
5
4
3
NOTE
2
NOTE
1
NOTE
B
Code Security
Screen
B