Kenwood KVT-911DVD Car Stereo System User Manual


 
Returning to the Source Control Screen
Touch [ RTN ] to return to the Source Control
Screen.
Adjusting the Balance Levels
Each time you touch [ ], the sound in the left
channel is emphasized.
Each time you touch [ ], the sound in the
right channel is emphasized.
Adjusting the Fader Levels
Each time you touch [ ], the sound in the front
channel emphasized.
Each time you touch [ ], the sound in the rear
channel emphasized.
Recalling Your Settings of the Crossover
Network/Delay time
<When the KDS-P900/P901 is connected>
Touch [ 1 ] - [ 6 ] for the desired Crossover
network and delay time setting.
Recalling Your Sound Settings
<When the KDS-P900/P901 is not connected>
Touch [ 1 ] - [ 5 ] for the desired sound preset
setting.
<When the KDS-P900/P901 is connected>
Touch [ 1 ] - [ 3 ] for the desired parametric
equalizer setting.
External Amp Control
Adjust the bass boost level of the external
amplifier using the main unit.
Each time you touch [ Amp Ctrl ] to switch the
Bass boost level as follows
" OFF "
Bass boost level is flat.
" MODE1 "
Bass boost level is low (+6dB).
" MODE2 "
Bass boost level is high (+12dB).
Refer to the catalog or instruction manual for
power amplifiers that can be controlled from this
unit.
NOTE
A F
53
D
E
B
C
A
D
C
F
E
B
Quick Effect Screen