Filter
Top Products
51
E
Adjusting the Sub Woofer
Touch the [ ] or [ ] to adjust the delay time for
non-fading output.
You cannot operate when the “Sub Woofer“ is
set to "OFF" ( see P 47 ).
Ending to the Delay Time Setting
Screen
Touch [ RTN ] to return to the crossover network
screen.
NOTE
The ideal listening position for 5.1-channel
surround playback is the point at equal
distance from all speakers.
By setting the delay time for the center and
surround speakers, this item realizes the ideal
listening position virtually.
Adjusting the Front Left Speaker
Touch the [ ] or [ ] to adjust the delay time
for front left output.
Adjusting the Front Right Speaker
Touch the [ ] or [ ] to adjust the delay time
for front right output .
Adjusting the Rear Left Speaker
Touch the [ ] or [ ] to adjust the delay time
for rear left output.
You cannot operate when the “Multi channel“ is
set to “3/0“ or “2/0“ ( see P 47 ) <When playing
with multi-channels>.
Adjusting the Rear Right Speaker
Touch the [ ] or [ ] to adjust the delay time
for rear right output.
You cannot operate when the “Multi channel“ is
set to “3/0“ or “2/0“ ( see P 47 ) <When playing
with multi-channels>.
Adjusting the Center Speaker
Touch the [ ] or [ ] to adjust the delay time for
center output.
• You cannot operate when the “Center SP“ is
set to "OFF" ( see P 47 ) <When playing with
the 2ch PCM signal>.
• You cannot operate when the “Multi channel“
is set to “2/2“ or “2/0“( see P 47 ) <When
playing with multi-channels>.
NOTE
NOTE
NOTE
A
A
D
B
E
C
F
G
C
D
F
B
G
Delay Time Setting Screen