Filter
Top Products
67
The following messages are displayed when certain problems are occurring in your system.
Take the recommended actions.
The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C (140°F),
stopping all operation.
] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls
below 60°C (140°F), the disc will start playing again.
Hot Error
The DVD software encoded for other region code.
Region code
Error
More than two DSP/EQUALIZER units are connected.
BUS-E11
More than two center units are connected.
BUS-E50
The disc player is malfunctioning.
] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or
the disc cannot be ejected.
Mecha Error
The parental level is set to high levels.
Parental
level Error
The unplayable discs is inserted
Disc Error
The unit is malfunctioning for some reason.
] Press the reset button on the unit. If the "Error- ##" code does not disappear, consult your nearest
service center.
Error 07
Error 17
Error 27
Error 37
Error 47
Error 57
Error 67
The disc is upside-down.
] Load the disc with the labeled side up.
The disc is quite dirty.
] Clean the disc, referring to the section on "Cleaning discs" (see p. 5).
Read Error