Filter
Top Products
49
•You cannot operate when the “Center SP“ is
set to "OFF" ( see P 47 ) <When playing with
multi-channels>.
•You cannot operate when the “Multi channel“ is
set to “2/2“ or “2/0“ ( see P 47 ).
Returning to the Sound Effect Menu
Screen
Touch [ RTN ] to return to the sound effect menu
screen.
Setting the Channel Balance
This item allows you to adjust the output level
of each type of speaker using the built-in test
signal.The output level must be adjusted from
the listening position.The factory setup is “0
dB” for all types of speakers.
Test Signal
This item allows you to output the built-in test
signal from the speakers. Use the test signal
for setting the balance between channels.
Each time you touch [ Noise ] to switch the test
signal function on and off.
Adjusting the Front Left Speaker
Each time you touch [ ] or [ ] to adjust the
front left output level.
Adjusting the Front Right Speaker
Each time you touch [ ] or [ ] to adjust the
front right output level.
Adjusting the Rear Left Speaker
Each time you touch [ ] or [ ] to adjust the rear
left output level.
You cannot operate when the “Multi channel“ is
set to “3/0“ or “2/0“ ( see P 47 ) <When playing
with multi-channels>.
Adjusting the Rear Right Speaker
Each time you touch [ ] or [ ] to adjust the rear
right output level.
You cannot operate when the “Multi channel“ is
set to “3/0“ or “2/0“ ( see P 47 ) <When playing
with multi-channels>.
Adjusting the Center Speaker
Each time you touch [ ] or [ ] to adjust the
center output level.
NOTE
NOTE
NOTE
G
A B
D E
F
C
A
B
F
E
C
G
Channel Level Setting Screen
D