Filter
Top Products
SPAN-CPT Operation Chapter 3
SPAN-CPT User Manual Rev 8 35
3.9.2 Veripos Marine Subscriptions
A subscription is required to use the Veripos services. Contact Veripos sales at www.veripos.com/
support.html to obtain a Service Access License (SAL) number. To activate the service, contact the
Veripos Help Desk at +44 (0) 1224 527 104 or visit www.veripos.com/support.html
. Provide the SAL
number and the receiver's Veripos Serial Number (VSN). To obtain the receiver-specific VSN, enter the
following command:
log veriposinfo
The log displays the VSN in the first field following the log header and also displays the status of your
subscription.
To activate a subscription, the receiver must be powered and tracking an L-Band Veripos satellite prior to
the planned activation time. Use the
ASSIGNLBANDBEAM command to configure the receiver to track
the Veripos satellite.
3.9.3 OmniSTAR
A subscription is required to use the OmniSTAR service. To obtain a subscription, contact OmniSTAR at
1-888-883-8476 or 713-785-5850. Provide the receiver’s OmniSTAR serial number (which is different
from the NovAtel serial number). To obtain the OmniSTAR serial number, enter the following command:
log lbandinfo
The log displays the L-Band serial number in the fifth field following the log header. The log also provides
the status of your subscription. Refer to the LBANDINFO log in the OEM6 Family Firmware Reference
Manual (OM-20000129) for more information.
To activate the subscription, the receiver must be powered and tracking an L-Band satellite. When
advised by OmniSTAR of the appropriate satellite frequency and data link rate for your location, use the
ASSIGNLBAND command to configure your receiver.
Example:
assignlband omnistar 1557855 1200
To confirm tracking of an L-Band signal, log the L-Band status information by entering the following
command:
log lbandstat
Subscriptions to the Veripos Apex and Ultra marine services must be obtained directly from
Veripos. A unit with a marine subscription can not be switched to a land subscription and
vice versa.
The latest services and coverage can be obtained from www.veripos.com. For additional
information on Veripos activation, contact NovAtel Customer Service at www.novatel.com/
support or download the APN-062 NovAtel CORRECT with Veripos from:
www.novatel.com/support/search/items/Application%20Note
.
OmniSTAR
®
service is not supported for OEM6 products sold after October 24, 2013. If
unsure whether the receiver is OmniSTAR capable, contact NovAtel Sales at
www.novatel.com/where-to-buy/sales-offices
, NovAtel Customer Support at
www.novatel.com/support
or visit www.novatel.com/products/novatel-correct.
The latest frequencies can be obtained from: www.omnistar.com.