Filter
Top Products
Black plate (10,1)
Use and care of the remote
control
Installing the battery
Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus (–) poles pointing in the proper di-
rection.
! When using for the first time, pull out the
film protruding from the tray.
WARNING
Keep the battery outof the reach of children.
Should the battery beswallowed, immediately
consult a doctor.
CAUTION
! Use only oneCR2025 (3 V) lithiumbattery.
! Remove thebattery if the remotecontrol is not
used for amonth or longer.
! Do not recharge, disassemble, heator dispose
of the battery in fire.
! Do not handlethe battery with metallic tools.
! Do not storethe battery with metallic materi-
als.
! In the eventof battery leakage, wipe there-
mote control completelyclean and installa
new battery.
! When disposing ofused batteries, please
comply with governmental regulations oren-
vironmental public institutions’ rules that
apply in yourcountry/area.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
! The remote control may not function prop-
erly in direct sunlight.
Important
! Do not storethe remote control inhigh tem-
peratures or directsunlight.
! Do not letthe remote control fallonto the
floor,where it may becomejammed under the
brake or accelerator pedal.
FUNCTION button and AUDIO button
You can also select the desired mode by
FUNCTION button and AUDIO button on the
remote control. But operation of FUNCTION
button and AUDIO button on the remote con-
trol differs from the operation of
MULTI-CONTROL on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.
FUNCTION button operation
% Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press FUNCTION repeatedly to switch be-
tween the following modes:
Play mode (repeat play)—Random mode
(random play)—Scan mode (scan play)—
Pause (pause)—Compression (compression
and BMX)—Search mode (search method)—
TitleInput "A" (disc title input)
Note
Refer toIntroduction of advanced built-in CD
player operation onpage 20.
AUDIO button operation
% Press AUDIO to select the desired
mode.
Press AUDIO repeatedly to switch between
the following modes:
<CRD4060-A/N>10
Before You Start
En
10
Section
01