Filter
Top Products
Black plate (16,1)
Listening to the radio
5
5
5
6
6
6
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
Important
If you are usingthis unit in North,Central or
South America, resetthe AM tuning step(see
Setting the AMtuning step on page78).
1 Bandindicator
Shows which band the radio is tuned to, AM
or FM.
2 Stereo(5) indicator
Shows when the selected frequency is
being broadcast in stereo.
3 Presetnumber indicator
Shows which preset has been selected.
4 LOCindicator
Shows when local seek tuning is on.
5 Bassboost indicator
Shows the bass boost level.
! About the bass boost, refer to Boosting
the bass on page 74.
6 Frequencyindicator
Shows the frequency to which the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Press BAND to select a band.
Press BAND until the desired band (FM-1,
FM-2, FM-3 for FM or AM) is displayed.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The frequencies move up or down step by
step.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancelseek tuning by pushing
MULTI-CONTROL left or right.
# If you push andhold MULTI-CONTROLleft or
right you canskip stations. Seek tuningstarts as
soon as yourelease MULTI-CONTROL.
<CRD4060-A/N>16
Tuner
En
16
Section
04