Filter
Top Products
Black plate (43,1)
3 Press and hold one of0-9 on the remote
control to store the selected phone number
in that preset.
Press 1 to store in P1; 4 to store in P4, etc.
Press 0 to store in preset P10. Hold the button
down until you hear a beep.
# Up to 50phone numbers (10 phonenumbers
for each of thethree registered phonesand two
guest phones) canbe stored in memory.
Clearing memory
You can clear memory of each item; Phone
Book, dialed/received/missed call history list
and preset phone number.
1 Use MULTI-CONTROL to select
Clear memory in the function menu.
Clear memory appears in the display.
2 Push MULTI-CONTROL up or down to
select an item.
Each time MULTI-CONTROL is pushed up or
down, the items are switched in the following
order:
Phone book (phone book)—Missed calls
(missed call history)—Dialled calls (dialled
call history)—Receiv. calls (received call his-
tory)—Dial preset (preset phone numbers)—
All clear (delete all memory)
# If you select Allclear, allmemory regardless
of items willbe cleared.
3 Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
Clear memory YES is displayed. Clearing
memory is now on standby.
# If you do notwant to clear memory thatyou
have selected, pushMULTI-CONTROL left. The
display reverts.
4 Press MULTI-CONTROL to clear the
memory.
Cleared is displayed and data on the selected
item is cleared from this unit’s memory.
Using the Call History
The ten most recent calls made (dialed), re-
ceived and missed, together with their times
and dates, are stored in the Call History. You
can browse the Call History and call numbers
from it.
Displaying the Call History
The Call History is divided into three groups:
Missed calls, Dialed calls, and Received calls.
You can see the time and date of the call, as
well as the number (and name if the number
is in the Phone Book).
1 Press LIST to display the list.
Press LIST repeatedly to switch between the
following lists:
Phone book—Missed call—Dialled call—Re-
ceived call
# About the PhoneBook list, refer toUsing the
Phone Bookon page 39.
# If no phonenumbers have been storedin the
selected list, NoData is displayed.
2 Turn MULTI-CONTROL to select a phone
number.
Turning MULTI-CONTROL clockwise or coun-
terclockwise to change the phone numbers
stored in the list.
# If the number isalready in the PhoneBook
the name isdisplayed.
# You can alsochange the phone numberby
pushing MULTI-CONTROL up or down.
<CRD4060-A/N>43
Bluetooth Telephone
En
43
English
Section
07