Filter
Top Products
Black plate (8,1)
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
! Prior to using this unit for the first time
after installation
! If the unit fails to operate properly
! When strange or incorrect messages ap-
pear on the display
% Press RESET with a pen tip or other
pointed instrument.
RESET button
Clearing all memory
To protect personal and private information,
data about the phone stored in this unit can
be deleted.
1 Press SOURCE and hold until the unit
turns off.
2 Press MULTI-CONTROL and hold until
Language select appears in the display.
3 Turn MULTI-CONTROL to select
Phone reset.
Phone reset appears in the display.
4 Push MULTI-CONTROL right to show a
confirmation display.
Clear memory YES is displayed. Clearing
memory is now on standby.
# If you do notwant to reset phonememory,
press BAND.
5 Press MULTI-CONTROL to clear the
memory.
All data in the telephone source, including
Phone Book entries, number presets and the
Call History is cleared.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the provided protective
case to prevent theft.
! If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound and
the front panel will open.
! You can turn off the warning tone. See
Switching the warning tone on page 78.
! You can turn off the face auto open. See
Switching the face auto open on page 78.
Important
! Never use forceor grip the displayand the
buttons too tightlywhen removing or attach-
ing.
! Avoid subjectingthe front panel toexcessive
shocks.
! Keep the frontpanel out of directsunlight and
high temperatures.
! A few secondsafter turning the ignition
switch to onor off, the front panelautomati-
cally moves. Whenthis happens, your fingers
may become jammedin the panel, sokeep
your hands awayfrom it.
<CRD4060-A/N>8
Before You Start
En
8
Section
01