Filter
Top Products
Black plate (71,1)
Introduction of audio
adjustments
1
1
1
1 Audiodisplay
Shows the audio adjustment status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option; press to se-
lect.
The audio function name appears on the dis-
play.
3 Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL clockwise or counter-
clockwise to switch between the audio func-
tions in the following order:
Fader (balance adjustment)—PWRFL (graphic
equalizer adjustment)—50Hz (7-band graphic
equalizer adjustment)—LOUD (loudness)—
Sub W.1 (subwoofer on/off setting)—Sub W.2
(subwoofer setting)—Bass (bass boost)—HPF
(high pass filter)—SLA (source level adjust-
ment)
# You can alsoswitch between the audiofunc-
tions in reverseorder by turning
MULTI-CONTROL counterclockwise.
# You can selectthe Sub W.2only when sub-
woofer output isturned on in SubW.1.
# When selecting theFM tuner as thesource,
you cannot switchto SLA.
# Toreturn to the displayof each source, press
BAND.
Note
If you do notoperate the audio functionwithin
about 30 seconds,the display is automatically re-
turned to thesource display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1 Use MULTI-CONTROL to select Fader.
Fader appears in the display.
# If the balancesetting has been previouslyad-
justed, Balance willbe displayed.
2 Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F15to R15isdisplayed as the front/rear
speaker balance moves from front to rear.
# F/R 0 isthe proper setting whenonly two
speakers are used.
# When the rearoutput setting is RearSP:S/W,
you cannot adjustfront/rear speaker balance.
Refer toSetting the rear output and subwoofer
controller on page79.
3 Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time MULTI-CONTROL is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L15to R15isdisplayed as the left/right
speaker balance moves from left to right.
<CRD4060-A/N>71
Audio Adjustments
En
71
English
Section
13