Filter
Top Products
Black plate (77,1)
3 Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1 Use MULTI-CONTROL to select Clock.
Clock appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
As you select segments of the clock display
the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the clock.
Pushing MULTI-CONTROL up will increase
the selected hour or minute. Pushing
MULTI-CONTROL down will decrease the se-
lected hour or minute.
Notes
! You can matchthe clock to atime signal by
pressing MULTI-CONTROL.
— If the minuteis 00 to 29, the minutes are
rounded down. (e.g., 10:18 becomes
10:00.)
— If the minuteis 30 to 59, the minutes are
rounded up. (e.g.,10:36 becomes 11:00.)
! Even when thesources are off, theclock dis-
play appears onthe display. Pressing CLOCK
when the sourcesand feature demo areoff,
turns the clockdisplay on or off.
Setting the FM tuning step
The FM tuning step employed by seek tuning
can be switched between 100 kHz, the preset
step, and 50 kHz.
1 Use MULTI-CONTROL to select FM step.
FM step appears in the display.
2 Press MULTI-CONTROL to select the FM
tuning step.
Pressing MULTI-CONTROL repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz. The selected FM tuning step will
appear in the display.
Note
If seek tuningis performed in50 kHz steps, sta-
tions maybe tuned inimprecisely.Tune inthe sta-
tions with manualtuning or use seektuning
again.
<CRD4060-A/N>77
Initial Settings
En
77
English
Section
14