Filter
Top Products
1 PushM.C. upor downto select adesired level.
0 to+6 isdisplayed asthe levelis increased orde-
creased.
HPF (highpass filteradjustment)
When youdo notwant lowsounds from thesubwoo-
fer outputfrequency rangeto play fromthe frontor
rear speakers,turn onthe HPF (highpass filter).Only
frequencies higherthan thosein the selectedrange
are outputfrom thefront orrear speakers.
1 PressM.C. toturn highpass filter onor off.
2 PushM.C. leftor right toselect cut-offfrequency.
50Hz—63Hz—80Hz—100Hz—125Hz
SLA (sourcelevel adjustment)
SLA (Sourcelevel adjustment)lets you adjustthe vo-
lume levelof eachsource toprevent radical changes
in volumewhen switchingbetween sources.
! Settings arebased onthe FMvolume level, which
remains unchanged.
Before adjustingsource levels,comparethe FM
volume levelwith thelevel of thesource youwish
to adjust.
! The AMvolume levelcan alsobe adjusted with
source leveladjustments.
1 PushM.C. upor downto adjust thesource vo-
lume.
Adjustment range:+4 to–4
Note
When selecting FM as the source, you cannot
switch to SLA.
Initial Settings
1
1 Function display
! Shows the function status.
1 Press SRC/OFF and hold until the unit
turns off.
2 Press M.C. and hold until the initial set-
ting menu appears in the display.
3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
Language select(multi language)
For yourconvenience, thisunit equipsmultiplelan-
guage display.Youcan selectthe language bestsui-
ted toyour first language.
1 PressM.C. toselect thelanguage.
English—Français—Español
Calendar (settingthe date)
1 PushM.C. leftor right toselect thesegment of
the calendardisplay youwish to set.
Year—Day—Month
2 PushM.C. upor downto setthe date.
Clock (settingthe clock)
1 PushM.C. leftor right toselect thesegment of
the clockdisplay youwish toset.
Hour—Minute
2 PushM.C. upor downto puta clock right.
! You canmatch theclock toa timesignalby press-
ing M.C.
! If 00to 29,the minutesare rounded down.
(e.g., 10:18becomes 10:00.)
! If 30to 59,the minutesare rounded up.(e.g.,
10:36 becomes11:00.)
EngineTime alert(elapsed timedisplaysetting)
This settingallows youto measure thelength oftime
that elapsesfrom whenthe machine isturned onand
display theamount ofelapsed timeper set period.
Also,you will hearalarm.
1 PressM.C. toselect your favorite setting.
OFF—15Minutes—30Minutes
USB plug&play(plug andplay)
Operating this unit
En
15
English
Section
02