Open as PDF
Setting the time display on or off
You can display the clock on each sound source
to select the time display.
Each press of
CLOCK turns time display on or
• The time display disappears temporarily when
you perform other operations, but the time indi-
cation is displayed again after 6 seconds.
• Even when the sources and the feature demo
are off, the time appears on the display.
Pressing CLOCKswitches the time display
Using different entertainment
You can enjoy entertainment displays while
listening to each sound source.
Each time you press ENTERTAINMENTthe
display changes in the following order:
SOURCE ICON DISPLAY—BGV 1—BGV 2—BGV
3—BGV 4—LEVEL INDICATOR 1—LEVEL INDI-
CATOR 2—MOVIE SCREEN 1—MOVIE SCREEN
• BGV stands for Back Ground Visual.
Using the AUX source
An IP-BUS-RCA Interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets you
connect this unit to auxiliary equipment featur-
ing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner‘s manual.
Selecting AUX as the source
to select AUX as the source.
SOURCE until AUX appears in the display.
• If the auxiliary setting is not switched on, AUX
cannot be selected. For more details, see
Switching the auxiliary setting on page 34.
Setting the AUX title
The title displayed for the AUX source can be
1 After you have selected
AUX as the source,
FUNCTION and hold until TITLE appears
in the display.
2 Press 1 numbered button to select the desired
Press 1 numbered button repeatedly to switch
between the following character type:
Alphabet (Upper case), Numbers and Symbols—
Alphabet (Lower case)
• You can select to input Numbers and Symbols
by pressing 2 numbered button.