Filter
Top Products
11
Network Unit
OWNER’S MANUAL
Name and function of each part
ENGLISH
Name and function of each part
POWER
Serial port
This is used when controlling
the external equipment via the
network. (p.57)
Power indicator
This illuminates red when the
Network function is set ON in the
projector menu.
LAN port
Connecting the LAN cable.
(p.13)
SW lever
Presses the detection
SW on the rear panel of
the projector when this
unit is mounted.(p.12)
Computer Input
Terminal
Use as the Computer 2
RGB analog input terminal.
(p.12)
LINK indicator (Orange)
This illuminates orange when
the Network Unit is connected
to the network correctly.
ACT indicator (Green)
This turns on and off when
sending or receiving of data
✐ Do not touch the connector. It may damage the product.
Caution
!
Connector plug
Connect to the DVI terminal on
the projector. (p.12)