Filter
Top Products
56
Controlling the Multi-Projectors
Selection of another projector
When you register the projectors for the multi-control, the IP addresses of the regis-
tered projectors are listed on the "Change a Projector" menu on the lower left side of
the page. If each projector has a name, the projector name is indicated instead of the
IP address. To register the projector name, see chapter "Exclude/Add the projectors
from/into the multi-control" on page 53.
1 To switch the projector to control, click on the linked text of IP address or projector
name.
2 The login page for the selected projector is displayed with a new window and then
enter the password for this projector and login.
You can control and set up this projector.
Projector selection menu
Click on the linked text to switch the
projector.