Filter
Top Products
15
Network Unit
OWNER’S MANUAL
Network configuration
ENGLISH
Configure the network with the
projector
Turn the projector on and
display the network setting
menu on the screen.
Configure the network through
the projector's menu.
Restart the Network Unit
Configure the network with computer
Temporarily set up the computer's
network with the default network
number of the Network Unit
Restart the Computer, if required
Using the web browser and login to
the setting page of the Network Unit
by accessing the default IP address.
Change the network address you
want to connect to the existing
network through the setting menu
on the browser.
Restart the Network Unit
Reset to the computer's original
network configuration.
Completing the network configuration. Perform the
basic setting and operation of the projector by using
the web browser. Please see chapter "Basic Setting"
on page 25 for further information.
A B
Please see further
informatin on pages
16-17.
Please see further
informatin on pages
18-23.
Please see further
informatin on pages
25-31.
Example of projector's configuration
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
Example of projector's configuration
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway : (blank)
DNS : (blank)
Default Network Address of the Network
Board
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Example of projector's configuration
IP Address : 192.168.1.201
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.1
DNS : 0.0.0.0
p.18
p.16
Procedure of Connecting the projector to the network
[4] Network configuration
When you connect a projector to a network, the network number of projector must
be the same as the network you intend to connect. You should configure projector’s
network first. Make sure that the projector is connected to the network correctly.
There are 2 ways to configure the network, by using the
[A] projector’s menu, or by
using the
[B] computer . Refer to the chart below and use the method you prefer.