Filter
Top Products
Available options: Press 1 to save the new setting (donE), or press 2 to discard all
changes (rstr), or press 3 to cancel the operation (abrt).
Repeat this action to change (i.e., enable or disable) the Search setting. A Signal
Search can be executed from any channel. For more information about signal
searches, see “Setting up the receiver”.
6LJQDO6WUHQJWK
Display only: The Signal Strength option is an Alt-1 Mode function. The displayed
Signal Strength (any number from 0 through 99) is associated with the Symbol Rate
and signal input level.
The Signal Strength can be displayed from any channel.
6\PERO5DWH
The Symbol Rate option is an Alt-1 Mode function. The selected Symbol Rate must
match the Symbol Rate associated with the transmitted signal. If you are unsure
about which Symbol Rate to use, contact your dealer/reseller, or local service pro-
vider.
Perform the first step if you are changing the Symbol Rate.
Available options: Press 1 to save the new setting (donE), or press 2 to discard all
changes (rstr), or press 3 to cancel the operation (abrt).
Repeat this action to change to another Symbol Rate (see “…About changing the
Symbol Rate”). You can use the / arrow buttons to change between low and
high resolution (see “…About frequency settings”). The Symbol Rate can be dis-
played from any channel, but can only be changed from the Installer Channel (see
“…About the current channel”).