Filter
Top Products
Available options: Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Repeat this action to change the Video Standard. The Video Standard is initially
preset to NTSC or PAL-B, depending on factory-installed options. Within your
local network or jurisdiction, the local service provider may output a NTSC (525-
line) or PAL-M (625-line) QPSK (downlink) signal. When set to AUTO, the receiver
automatically displays video using the Video Standard associated with the QPSK
(downlink) signal. When set to a specific Video Standard, the receiver displays
video only when the current setting matches the Video Standard associated with
the received signal. If the Video Standard (current setting) and do not match the
received signal, an on-screen message displays to confirm that the current setting is
invalid.
If you are unsure about which Video Standard to use, contact your dealer/reseller,
or local service provider (see also “…About changing the Video Standard”).
«$ERXWYLGHRVXEWLWOHV
Your Headend Satellite Receiver can decode and display video subtitles on-screen
if this information is broadcast as part of the encoded digital signal. Video subti-
tling is defined at the uplink via PowerVu System software, and can be set for dis-
play in a number of different languages, or can be disabled. When available, subti-
tle text appears at the bottom of the TV monitor screen and is synchronized with
video programming. If the current subtitle language setting is incompatible, un-
available or does not match the subtitle information in the received digital signal,
no subtitles are displayed. When you disable video subtitling (i.e., OFF) and exit to
video from menus, a banner text message displays to confirm that no subtitles will
display. For a list of available subtitle languages, see Table 7.
Available options: Press 1 to save the new settings (Yes), or press 2 to discard all
changes (No), or press 3 to cancel the operation (Cancel).
Repeat this action to change the Subtitles Language. If you are unsure about which
language to use, contact your dealer/reseller, or local service provider.
To change the display characteristics of the subtitle language, refer to the Display
Setup menu.