Filter
Top Products
60
E
OTHERS menu
Function
Command Direction
Parameter Reply Control/Response contents
SCREEN MOTION PATTERN SCSV WR 0-4 0-4 0: OFF, 1-4: PATTERN1-4
MOTION TIME1 MTIM WR 0-20 0-20
MOTION TIME2
(PATTERN1)
MINT WR 10-990 10-990 Per 10 seconds
MOTION TIME2
(PATTERN2-4)
MINT WR 5-20 5-20 Per second
POWER MANAGEMENT (PC) PMNG WR 0-1 0-1 0: OFF, 1: ON
POWER MANAGEMENT (AV) PMAV WR 0-1 0-1 0: OFF, 1: ON
CONNECT AUTO INPUT SELECT AICO WR 0-1 0-1 0: OFF, 1: ON
NO SIGNAL AUTO INPUT SEL. AINO WR 0-1 0-1 0: OFF, 1: ON
AUTO INPUT
SELECT
PRIORITY
DisplayPort
APDP WR 0-7 0-7 0: Not selected by auto input selection, 1-7: Priority setting
• If OFF is selected for WHITEBOARD, “ERR” occurs when 7 is selected.
• “ERR” when OFF is selected for NO SIGNAL AUTO INPUT SEL..
• All input terminals cannot be set to 0 simultaneously.
HDMI1 APH1
HDMI2 APH2
HDMI3 APH3
D-SUB1 APD1
D-SUB2 APD2
WHITEBOARD APWB
LOGO SCREEN BTSC WR 0-1 0-1 0: OFF, 1: ON
INPUT
RESOLUTION
(PC)
RESOLUTION CHECK
PXCK R - Returns current resolution in the form of hhh, vvv.
PIXEL SETTING
(D-SUB1[RGB],
D-SUB2,
WHITEBOARD)
PXSL WR 1 1 768) 1360 x 768
2 2 768) 1280 x 768
3 3 768) 1024 x 768
5 5 480) 848 x 480
6 6 480) 640 x 480
7 7 1050) 1680 x 1050
8 8 1050) 1400 x 1050
9 9 768) AUTO
10 10 480) AUTO
INPUT RESOLUTION (AV)
RESOLUTION CHECK
RESO R - 480i, 480p, 1080i, 720p, 1080p , etc.
ZOOM2 SPECIAL SETTING
(D-SUB1[RGB], D-SUB2,
WHITEBOARD)
Z2SP WR 0-1 0-1 0: OFF, 1: ON
SCAN MODE SCAN WR 0-2 0-2 0: MODE1, 1: MODE2, 2: MODE3 (When the input mode is AV)
COLOR SYSTEM CSYS WR 0-5 0-5 0: AUTO, 1: PAL, 2: PAL-60, 3: SECAM, 4: NTSC3.58, 5: NTSC4.43
Controlling the Monitor with a PC (LAN)