Filter
Top Products
Turning on and turning off the microphone
g To turn on the microphone
Press any button on the microphone.
The microphone status light flashes red, and then turns solid green.
I MPOR TA NT
If you do not see a light or you see an amber light, see Troubleshooting using the microphone status
light on page 47.
g To turn off the microphone
Press the Mute/Power Offbutton for four seconds.
The microphone status light turns off.
TI P
You can set your microphone to turn off automatically when you place it in the microphone charging
cradle, and to turn on when you remove it. For more information, see Customizing your microphone
on page 19.
Connecting the microphone to the room module
When your microphone is connected to the room module or an expansion sensor, the status light is
solid green. If the status light is amber or flashing red, the microphone isn’t connected.
g To connect the microphone to the room module
1. Stand within 15' (4.6 m) of the room module or an expansion sensor.
2. Point the microphone’s infrared transmitter at the room module or an expansion sensor.
3. Press the Mute/Power off button for four seconds to turn off the microphone.
4. Press any button to turn it on again.
C HA PTER 3
Usingthe microphone
15