Filter
Top Products
Uploading a configuration file
After you edit the settings, you can upload the configuration file to the control unit or to another control
unit in another room.
g To upload configurations to the control unit
1.1. Start SMARTAudio configuration software, and then select the Setup tab.
2. Click the Upload Configuration File to the CU button.
SMARTAudio configuration software settings are uploaded from your computer to the control
unit.
Saving a configuration file
After you edit your settings, you can save the configuration file to your computer as abackup or to
upload to another SMARTAudio system control unit.
g To save a configuration file
1. Start SMARTAudio configuration software, and then select the File > Save or File > Save
as.
2. Type a file name, and then click OK.
SMARTAudio software settings are saved to the file.
Setting the volume
The Volume tab enables you to do the following:
l Set amaster default volume for all audio input devices.
l Set specific default volumes for specific audio input devices.
You can set an auxiliary input volume from -30 dB to 8 dB. You can set microphone volumes from -40
dB to 6dB.
Other volume controls are based on these settings.
g To set the master default volume
Move the Master slider on the Volume tab up ordown.
OR
Change the volume by moving the up or down arrow.
C HA PTER 5
Customizingyour settings
33