Filter
Top Products
Opening a configuration file
You can open a configuration file with SMARTAudio configuration software, and then upload it to a
connected control unit. This could be part of implementing settings or restoring abackup of settings.
g To open a configuration file
1. Select Start > All Programs > SMART Technologies > SMART Tools.
2. Click Audio Configuration Software.
The SMART Audio Configuration Software screen appears.
I MPOR TA NT
If the Windows operating system does not see aSMART device, awarning appears.
Connect your computer to a SMARTAudio system control unit with a USB cable.
3. Select File > Open.
4. Browse to and select the LPT file.
SMARTAudio configuration software settings are loaded from the file.
Downloading a configuration file
You can download the configuration file from the control unit to your Windows computer to do one of
the following:
l Configure specific settings
l Store a backup of the control unit’s settings
l Copy the specific settings, and then upload them to another control unit in anotherroom
g To download a configuration file
1. Start SMARTAudio configuration software, and then click Download Configuration File
from CU on the Setup tab.
The file downloads from the control unit to your computer.
2. Edit the file, if you desire.
3. Select File > Save to save the configuration file to your computer.
C HA PTER 5
Customizingyour settings
32