Smart Technologies 340 Car Amplifier User Manual


 
Important information
W AR N IN G
l Failure to follow the installation instructions shipped with your SMART product could result in
personal injury and damage to the product which may not be covered by your warranty.
l To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
moisture.
l Ensure that any cables extending across the floor to your SMART product are properly
bundled and marked to avoid a trip hazard.
l Do not open or disassemble the SMART product. You risk electrical shock from the high
voltage inside the casing. Opening the casing also voids your warranty.
l To reduce the risk associated with leaking batteries:
o
do not leave the battery in the product for an extended period
o
do not heat, disassemble, or short the battery, or expose it to fire or high temperature
o
avoid eye and skin contact if batteries have leaked
o
dispose of exhausted batteries and product components in accordance with applicable
regulations
l Do not charge the battery with any power adapter other than the one supplied. Do not charge
other battery types in yourSMART product with the supplied power adapter. Both of these
actions can cause damage to the product and can cause a fire or personal injury.
l If the SMART product becomes excessively warm or emits an unusual smell while the
battery is recharging, immediately disconnect the power adapter from the power outlet and
turn the product off.
l Do not place items otherthan your microphone in your microphone charging cradle. Items
can create an electrical short leading to product damage, fireor personal injury.
l Ensure yourceiling or ceiling tiles are strong enough to support the ceiling-mounted product
components and use tethers if provided or required. Failure to securely install components
might lead to components falling which can cause personal injury and product damage that
may not be covered by your warranty. Refer to product documentation to find component
weights.
l Ensure the installation of your SMART product meets local building codes and regulations.
iii