Filter
Top Products
Setting amplifier trim
If a speaker is too loud or too quiet for a portion of the room, you can adjust the speaker trim from -12
dB to 6dB in 1 dB increments.
N OTE
Adjusting the trim too high can cause feedback.
g To set amplifier trim
Use the up and down arrows in the Amplifier Trims area on the Speaker Control tab to adjust
the trim.
N OTE
The default setting is 0dB.
Saving and recalling equalization settings
You can save equalization settings in the room module to enable you to respond to different situations
in the same SMARTAudio system installation or to save several rooms’ equalization settings in the
same LPT file, and then later apply them to each individual room.
g To save equalization settings
1. Create your equalization settings on the Speaker Control tab.
2. Select the name you prefer for the current equalization from the Save EQ drop-down list.
3. Click the Save Selected EQ button.
g To recall equalization settings
Select an equalization from the RecallEQ drop-down list on the Speaker Control tab.
C HA PTER 5
Customizingyour settings
36