Filter
Top Products
Technical Specification
Page B-18 Reference Guide: TT128x High Definition Professional Receiver/Decoder
ST.RE.E10141.5
Digital Video
Table B.23: Digital Video Output Connectors
Item Specification
Safety status SELV
Connector type BNC, Female, 75 Ω
Connector designation HD SDI 1
HD SDI 2
Output standard (USA) ANSI/SMPTE 292M
SDI output level 800 mV pk-pk nominal ±10%
Jitter Performance, Nominal
SMPTE Recommended Practices RP 192 –1996 Jitter Measurement
Procedures in Bit-Serial Digital Interfaces
B.5.2 Audio Outputs
Table B.24: Analogue and Digital Audio Output Connector
Item Specification
Safety status SELV
Connector type 2 x 9-Way D-type
Connector designation AUDIO 1
AUDIO 2
Output level +18 dBm nominal clipping level.
Selectable in range 12 to +24 dBm.
Nominal output impedance 50 Ω
Load impedance ≥600 Ω
Compressions layers MPEG-2 layer 1 and 2, linear audio and Dolby Digital (AC-3)
Sampling rates 32 kHz, 44.1 kHz and 48 kHz
Output formats Analogue, AES3 and Dolby Digital AC-3
B.5.3 Data Outputs
RS-232 Asynchronous (Low-speed) Data and RS-422
Synchronous (High-speed) Data
Table B.25: RS-232 Asynchronous (Low-speed) Data Connector
Item Specification
Safety status SELV
Connector type 9-Way D-type
Connector designation RS232/RS422 DATA OUT
Data-rates (bit/s) 1200; 2400; 4800; 9600; 19 200; 38 400
Standards EIA RS-232C / ITU-T BT. V.24/V.28
Line length < 15 metres