Filter
Top Products
Reference Guide: TT1280 High Definition Professional Receiver/Decoder Page E-1
ST.RE.E10141.5
Annex E
E. Factory Defaults
Units are shipped with the following factory default parameters. These can be restored
at any time using the System Menu. All other parameters are unaffected by restoring
the factory defaults.
Menu Description Default
#2 Input SELECT INPUT ASI
#2 Input
QPSK/8PSK/16
QAM
SOURCE 1
LNB FREQUENCY 10750.0 MHz
SATELLITE FREQUENCY 12168.0 MHz
SYMBOL RATE 27.5 Msym/s
MODULATION FEC QPSK auto
LNB POWER OFF
LNB 22 kHz Disabled
SEARCH RANGE 3000 kHz (5000 kHz)
REED-SOLOMON DISABLED
TTV G.703 INTERLEAVER DISABLED
SIGNAL LEVEL NORMAL
#3 Service FAIL MODE FREEZE FRAME
TEST PATTERN NONE
FRAME SYNC DISABLED
FSYNC PAL OFFSET +0000
FSYNC NTSC OFFSET +0000
4:2:0 DELAY 0 ms
4:2:2 DELAY 0 ms
OUTPUT MODE RGB
TRISYNC MODE ON ALL
EMBEDDED AUDIO CHANNEL ONE and TWO
EMBEDDED AUDIO DID 1 2E7H
EMBEDDED AUDIO DID 2 1E5H
DELAY ADJUSTMENT +0.0 ms
DIGITAL OUTPUT AES3
ROUTING STEREO