Filter
Top Products
Operating the Equipment Remotely
Reference Guide: TT128x High Definition Professional Receiver/Decoder Page 4-5
ST.RE.E10141.5
Entering the OAC Lockout PIN
Table 4.4: Entering the OAC Lockout PIN
Step Action Result
1. Go to menu #4.3.6 DIRECTOR. Displays ‘NCP LOCK OVERRIDE PIN’.
2. Press Edit. Displays ‘ENTER CURRENT PIN’.
3. Enter the four-digit PIN and press Save. The unit is ready for local control.
4.2 Returning the Unit to Local Control Mode
Once the unit is in remote control mode, no local controls are available. To
reacquire local control, it is necessary to set the remote control parameter
back to Front Panel.
Table 4.5: Configuring the Unit for Local Control
Step Action Result
1. Go to menu 7.1. Displays ‘OPERATING MODE’.
2. Press Edit. Displays ‘SERIAL REMOTE’ or ‘DIRECTOR NCP’.
3.
Press the down pushbutton and select
‘FRONT PANEL’ and press Save.
The unit is ready to be locally controlled.